The presence of an Orbi purple light on your router or satellite indicates that your device cannot access the internet. The issue occurs frequently with Netgear Orbi systems, but users can resolve it through straightforward methods.
Purple lights on the Orbi system appear because of these reasons
- The internet connection has been interrupted
- The Ethernet cable has either become loose or suffered damage
- The modem connection has encountered difficulties
- There exists a firmware problem
- The router has been incorrectly configured
How To Fix Orbi Purple Light Issue
1. Check Your Internet Connection
The modem must function properly. The modem needs a restart process that requires waiting until all lights achieve a stable state.
2. Inspect Cables
The Ethernet cable that connects the modem to the router needs to be checked for both proper connection and potential damage.
3. Power Cycle Your Devices
The user needs to switch off both the modem and Orbi router. The user should pause for two to three minutes. The user should first power on the modem followed by the router.
4. Move the Satellite Closer
The satellite should be moved closer to the main router because it helps to improve wireless signal strength.
You need to access your Orbi administrative panel for the purpose of checking available firmware updates.
6. Perform an Orbi Router Reset
An Orbi Router reset becomes necessary when all other methods fail. The user should press and hold the reset button for a duration of 10 seconds until the LED begins to blink amber. The user needs to establish the router again following this process.
Conclusion
The orbi purple light usually signals a connection issue, but it’s easy to resolve with basic troubleshooting. The internet connection will be restored through three methods which include checking cables, restarting devices and performing an Orbi Router reset.
